Flannery's Plaster Control Joint (PCS 75-25-25) is a wall trim that creates a ¼” aesthetic horizontal or vertical reveal in a typical stucco or plaster wall system. This part breaks up a plaster or stucco wall by creating horizontal and vertical reveal lines. Flannery's Plaster Control Joint is available with Aluminum Alignment Splices to ease the installation process and create crisp and clean butt joints and lines. Plaster Control Joints are installed much like Plaster Channel Screeds but have a small ¼” depth that the Plaster Channel Screed cannot achieve. Flannery's Plaster Control Joints can also be custom fabricated to be corners, intersections and radius and will be considered a custom part.
Flannery's Plaster Control Joint (PCS 75-25-25) is a standard extruded aluminum alloy 6063 T5 and has a .050” nominal wall thickness. Aluminum Plaster trims come in 10' lengths and shall have a standard Clear Anodized Finish unless indicated otherwise. Flannery's Plaster trims are versatile but are best suited for exterior wall systems but can work well on interior wall systems as well. Flannery's Plaster Control Joints can also be custom fabricated to be corners, intersections and radius and will be considered a custom part. Flannery's other finishes include, Mill Finish (for field priming & painting), Chem-film finish, or other factory finishes, and custom paint orders are also available upon request. You can view our factory finishes to see if we have what you are looking for or if you do not see the finish, you are looking for, chances are we can color-match it or we already have it! Flannery Trim wants to always make sure we can get you the right look and feel for your building project.
Stockton Products®
