Stockton Products: SFC: Short Flange Casing

WELCOME CUSTOM FABRICATION WHATS NEW

WIRE PRODUCTS

METAL PRODUCTS

EXTRUDED PRODUCTS

SHOW ALL
Plaster Trims
Drywall Trims
- Tapeable Flanges
- Drywall Channels
Fiber Cement Panel Trims

POZALITE®

PRODUCTS SUPPORT

Stockton Products® > Metal Products

In Use

Diagram

Installed

Custom Sizes

SFC: Short Flange Casing

Special Sizes Available, Contact Customer Service For Details
Available With 1/8" Weep Holes or No Holes
Available Curved Upon Request
Available in Aluminum (A), Copper (C), Galvanized Steel (GS), Bonderized (BN), Galvalume® (GVM), Stainless Steel (SS) or Zinc (Z)

This is the most frequently used casing bead for terminating drywall and plaster.

SFC Data Sheet
SFC Installation Guide

Stockton Submittal System

Note: This Installation Guide is supplied solely to assist in the selection and application of product manufactured by Stockton Products. This drawing is generic in nature and should not be used in design or construction without an independent evaluation by a qualified Architect or Engineer of Record.

Materials And Finishes:

More Information

Aluminum (A), Copper (C), Galvanized Steel (GS), Bonderized (BN), Galvalume® (GVM), Stainless Steel (SS) or Zinc (Z)

ASTM & Code Standards:

More Information

All Accessories are fabricated from prime galvanized steel G90 zinc coating by the hot dipped method, conforming to steel and coating specification ASTM A-653/A-653M or zinc alloy meeting ASTM B-69. Stainless Steel A480/A480M A580M (Stainless Steel) For installation and placement instructions refer to ASTM C1063, C841 and C926.

Notes And Reference Information:

Please note not all combinations of sizes and materials may be available in stock.

Not all X Sizes (Depth), Y Sizes (Reveal) and material combinations may be possible.

Ventilation Guide

Proper Measurement: Ground and Point-To-Point

Radius Shape Quote Form

The Stockton Products Warranty

CSI Specifications

CAD Details

Safety Data Sheets (SDS)

Most Common Sizes

X Sizes	3/8", 1/2", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 3/8" or 1 1/2"
Y Sizes	1 1/4", 1 1/2", 2" or 2 1/2"
Length	120"

Most Common Part Numbers:

SFC034 114	SFC: X=3/4, Y=1 1/4, GS, 10'
SFC034W114	SFC: X=3/4, 1/8 Weep Holes, Y=1 1/4, GS, 10'
SFC078 114	SFC: X=7/8, Y=1 1/4, GS, 10'
SFC078 114SS	SFC: X=7/8, Y=1 1/4, SS, 10'
SFC078 114Z	SFC: X=7/8, Y=1 1/4, Z, 10'
SFC078 200	SFC: X=7/8, Y=2, GS, 10'
SFC100 114	SFC: X=1, Y=1 1/4, GS, 10'
SFC118 114	SFC: X=1 1/8, Y=1 1/4, GS, 10'

Quote Request

To receive a no obligation quote simple fill out the form below. If you prefer, fell free to call customer service for assistance.

The more details you can give us, the better we can quote your request. Please send us any drawings or sketching you might have. We welcome custom projects and request, so fell free to let us know what your really look for. You can fax your drawing to (925) 454-9710 or eMail it to custom@stocktonproducts.com.

Stockton Products' are only sold through authorized distributors. If you are not a dealer please indicate your preferred dealer and/or Stockton sale rep on the form below.

CALIFORNIA RESIDENTS:

Please review our Prop 65 statement or visit www.P65Warnings.ca.gov.